Took oil pan off and put back on car will not go into gear

2002 FORD MUSTANG
140,000 MILES
Avatar
JAKET714
  • MEMBER
  • 2 POSTS
I went to change the oil in my 2002 ford mustang v6 and the drain plug was stripped so I took the oil pan off and drained it that way, once I put everything together the oil dipstick said it had 3 quarts of oil so I put a little bit in there and now the car won't go into gear.
Nov 14, 2011 at 8:29 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,240 POSTS
check the linkage to the transmission. Chances are you did something to it when removing the pan. Have you fixed the drain plug?
Nov 14, 2011 at 8:38 PM
Avatar
JAKET714
  • MEMBER
  • 2 POSTS
What linkage would I have to set it to be ok I have never messed with an issue like this is this a major issue not to mention it is leaking oil and I found a little yellow plug that came out with the oil pan I don't know what that is so I didn't mess with it, and no I didn't mess with the drain plug
Nov 14, 2011 at 9:08 PM
Avatar
MHPAUTOS
  • ✓Experienced Mechanic
  • 31,937 POSTS
Have you removed the engine oil pan or the transmission oil pan? as there will be no yellow plug in the engine sump???
Nov 17, 2011 at 1:38 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.