Indicator Clicking noise has stopped

12,500 MILES
Avatar
CLAIREBRUNT
  • MEMBER
  • 2 POSTS
Today whilst driving I noticed that the clicking noise made by the indicators has stopped. I checked both front and rear and the indicators are working correctly. It is just that the noise it has always made to indicate to the driver inside the vehicle that the indicators are on, has stopped. How can I fix this?

I also noticed that one of the rear doors is difficult to open and sounds like it has 'dropped' or that the door catch is sticking. Not sure if this is related or a separate issue. It appears to allow me to set the car alarm in the usual manner but when trying to open that particular door I really have to pull hard several times before it opens. Any ideas?
Aug 23, 2012 at 2:27 PM
Advertisement
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
a problem like this needs a good electrical shop to be able to trace circuits to find the issue. this is not a job for a do it yourself project.

Roy
Aug 23, 2012 at 7:28 PM
Avatar
CLAIREBRUNT
  • MEMBER
  • 2 POSTS
Does it need investigating if the lights still work? I don't mind getting it checked out but if the indicators are still working OK and just the noise has stopped....?
Aug 24, 2012 at 12:20 AM
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
I would get it checked out to verify in case it is something else.

Roy
Aug 24, 2012 at 3:03 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle