Advertisement

2002 Ford F-150 Converter

150,000 MILES • 5.4L • V8 • 4WD • AUTOMATIC
Avatar
MORTAL
  • MEMBER
  • 1 POST
Washed engine. Had loss off power and rough idle. Cleaned all visible connections with electrical spray. Drove down to get get gas to let air out more. Still rough idle, got to drive way and saw smoke. Looked underneath and converter's was cherry red. They are flow master. Just don't know if they would be bad now that they got that hot. And if i let it dry out more that it might work okay. Or maybe what sensor i might check to see what got wet that would cause it to have gas dump, or whatever would have made converter get that hot. Thanks for any help, just would like some advice.
Nov 9, 2014 at 6:22 AM
Advertisement
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
converters getting red is usually due to lean condition, scan for codes and check fuel pressure with a gauge then look for vacuum hoses broken/split or disconnected.
Nov 9, 2014 at 7:53 AM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle