SPONSORED LINKS

2002 Ford Expedition computer

Tiny
STANLEY12
  • MEMBER
  • 2002 FORD EXPEDITION
  • 5.4L
  • V8
  • 2WD
  • AUTOMATIC
  • 200,000 MILES
What damage are you familiar with that is caused by a power wire arcing to a ground while replacing an alternator? All 5 relays in the interior fuse panel plus the 15a fuse in position 14 are affected. The 15a fuse blew but replacement did not fix the problem. What should the voltage numbers be at the affected switches? Relays have yet to be bench tested but would like the whole story, what else could be affected if the relays check ok? Consider any effect on the PCU/ECM. The gen. Module has been exchanged with no effect on the problem.
SPONSORED LINKS
Sunday, July 12th, 2015 AT 10:40 PM

3 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
Exactly what IS the problem? You never stated what the issue is.
Was this
answer
helpful?
Yes
No
Monday, July 13th, 2015 AT 2:09 AM
Tiny
STANLEY12
  • MEMBER
  • 2 POSTS
The problem is that all the features powered by the 5 relays don't work, such as the power windows.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, July 13th, 2015 AT 3:51 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
Check all the maxi fuses and fusible links.
Was this
answer
helpful?
Yes
No
Monday, July 13th, 2015 AT 6:22 PM

Please login or register to post a reply.

Related Engine Computer Fuse Content

Engine Control Module (PCM) Fuse
VIDEO
Engine Control Module (PCM) Fuse
Instructional repair video
Engine Computer Fuse Fails
GUIDE
Engine Computer Fuse Fails
Each manufacturer designs their engine wiring systems a little differently, but one thing that stays the same is what an engine fuse supplies power to, such as the engine...
VIEW MORE

Sponsored links