code PO1747

V8 • 2WD • AUTOMATIC
Avatar
STEVIS
  • MEMBER
  • 28 POSTS
How do you replace the pressure control solenoid A on a 2002 Ford E series van.
Thanks Steve
Feb 9, 2011 at 11:22 AM
Advertisement
Avatar
BILLYMAC
  • ✓Experienced Mechanic
  • 2,204 POSTS
are you talking about for the transmission?
Feb 9, 2011 at 2:20 PM
Avatar
STEVIS
  • MEMBER
  • 28 POSTS
Yes I beleave the code PO1747 refers to a transmission problem.
Thanks, Steve
Feb 9, 2011 at 3:19 PM
Avatar
BILLYMAC
  • ✓Experienced Mechanic
  • 2,204 POSTS
this sensor is a internal transmission part it is located under the valve bodies.when working with this trans precission torqueing of the valvebody is a must they are torqued in inch lbs and have to be exact to the specs. good luck
Feb 10, 2011 at 12:28 PM
Avatar
STEVIS
  • MEMBER
  • 28 POSTS
Billymac thank you for the information the good luck part makes it sound a little ify. I have done many of the older transmissions in the past and just got back in to working on them. So I have some caching up to do on the newer stuff. Do you know if this is a tipical problem with this transmission?. Anyway thanks again.
Steve.
Feb 10, 2011 at 2:29 PM
Avatar
BILLYMAC
  • ✓Experienced Mechanic
  • 2,204 POSTS
yes steve this is a typical for the e4od. but you can handle it.once you get in there it will all come back. thanks for asking
Feb 11, 2011 at 1:29 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle

Advertisement