Backfire through intake

My Dodge Ram just did this exact thing yesterday. What did you find was the problem? Thanks

Mine did the exact same thing. Had a problem with one of the timing chains. Had new chains and tensioners put in and it runs like a top now

Back fires at highway speed and gauges fluxuates

Sorry I don't know which gauges it is a truck I can get a very good deal on a purchase. The seller said he had it checked and was told it was the computer I was curious about 2002 ram quad cab 4x4 for $1500. Just can't put a lot of money in it.

That is very true and he is the seller! It has 214000 miles. I'm also looking at a 99 dodge ram 5.9 4x4 was told the speedometer and odometer quit working and the brake light and the abs light is on he was told it was sensors. Any ideas on that?

I have a 2002 dodge ram 1500 4x4. It is an automatic with the manual transfer case in the floor. I was driving down the interstate yesterday. When I pushed on the gas to accelerate around a semi I heard a loud pop and now the truck won't drive. The drive shaft is fine. It still goes into gear but it will not move in any gear. If I push on the gas it just Revs up. I can still push the truck if I put it in nuetral. Any idea what it is?

No it is a 5.9 gas in a 99 ram 4x4 it has 123000+ miles.

Thank you for the help. Redneckgrandpa!

Can not figure out why my truck is back firing. It only back fires when you go down big hills when driving on the road. As soon as you get to the top of the hill and start going down if you don't either kept the gas on just barely or the brake barely on all the way down the hill then it will start sputtering from the exhaust before the loud back fire. We thought it was bad gas and put treatments in it. We also changed the plugs, distributor cap, rotary button and we still are getting the sputtering and back fires. We only have the one vehicle and can't put it in the shop to find out so can you help with some recommendations so we could fix it on our own.

2007 hemi pick up. I keep having a back fire. One tech said it's a miss fire on cylinder 6&7. I changed all 16 plugs. Still problem. Changed coils on 6, 7&8. Changed the cam or crank sensor (the one right below the alternator). Still having problems. No codes are being thrown on the computer. Help please

Exhaust