*** do you get a fan/clutch assmbley off the water pump I put a new water pump in my truck and cant get the fan off the old one
Mar 13, 2011 at 1:44 AM
water pump
2002 DODGE DAKOTA
DEMOND300
- MEMBER
- 1 POST
- FOLLOW
Advertisement
hammer/chisel cuss alot?
Mar 13, 2011 at 2:20 AM
REMOVAL
Disconnect battery negative cable.
The thermal viscous fan drive/fan blade assembly is attached (threaded) to water pump hub shaft. (Fig. 75). Remove fan blade/viscous fan drive assembly from water pump by turning mounting nut counterclockwise as viewed from front. Threads on viscous fan drive are RIGHT HAND. A Snap-On 36 MM Fan Wrench (number SP346 from Snap-On Cummins Diesel Tool Set number 2017DSP) and Special Tool 6958 Spanner Wrench with Adapter Pins 8346 can be used to hold the pulley still to prevent pulley from rotating. (Fig. 76).
Fig. 75: Removing Fan Blade/Viscous Fan Drive
Courtesy of DAIMLERCHRYSLER CORP.
Fig. 76: Removing Fan Blade & Viscous Fan Drive
Courtesy of DAIMLERCHRYSLER CORP.
DO NOT attempt to remove fan/viscous fan drive assembly from vehicle at this time.
DO NOT unbolt fan blade assembly from viscous fan drive at this time. (Fig. 77).
Fig. 77: Removing Viscous Fan Drive & Fan Blade
Courtesy of DAIMLERCHRYSLER CORP.
Remove upper fan shroud attaching hardware.
Disconnect battery negative cable.
The thermal viscous fan drive/fan blade assembly is attached (threaded) to water pump hub shaft. (Fig. 75). Remove fan blade/viscous fan drive assembly from water pump by turning mounting nut counterclockwise as viewed from front. Threads on viscous fan drive are RIGHT HAND. A Snap-On 36 MM Fan Wrench (number SP346 from Snap-On Cummins Diesel Tool Set number 2017DSP) and Special Tool 6958 Spanner Wrench with Adapter Pins 8346 can be used to hold the pulley still to prevent pulley from rotating. (Fig. 76).
Fig. 75: Removing Fan Blade/Viscous Fan Drive
Courtesy of DAIMLERCHRYSLER CORP.
Fig. 76: Removing Fan Blade & Viscous Fan Drive
Courtesy of DAIMLERCHRYSLER CORP.
DO NOT attempt to remove fan/viscous fan drive assembly from vehicle at this time.
DO NOT unbolt fan blade assembly from viscous fan drive at this time. (Fig. 77).
Fig. 77: Removing Viscous Fan Drive & Fan Blade
Courtesy of DAIMLERCHRYSLER CORP.
Remove upper fan shroud attaching hardware.
Images (Click to enlarge)
Mar 13, 2011 at 2:21 AM
Advertisement
you may be able to rent the tools from the local auto store chain.
Mar 13, 2011 at 9:36 AM