2002 Chrysler Sebring wants to start but wont

Tiny
ROBERT12801
  • MEMBER
  • 2002 CHRYSLER SEBRING
  • 2.7L
I changed the timming. Water pump. Battery. Sensor. Everything is right and correct. The car sounds like it wants to start but it dont. What could be wrong?
Sunday, August 23rd, 2015 AT 7:54 AM

16 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Try resetting security system if no manual look online
Was this
answer
helpful?
Yes
No
Sunday, August 23rd, 2015 AT 7:55 AM
Tiny
ROBERT12801
  • MEMBER
  • 9 POSTS
Is the key way part of the crank shaft? On a 2.7l chrystler sebring 2002
Was this
answer
helpful?
Yes
No
Tuesday, August 25th, 2015 AT 2:44 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
No
Was this
answer
helpful?
Yes
No
Tuesday, August 25th, 2015 AT 3:15 PM
Tiny
ROBERT12801
  • MEMBER
  • 9 POSTS
What if the key way is broke off even with the crank shaft? Is there a way to replace is with out having to having it machined or replacing it? If so do you know what or how I can? Thanks
Was this
answer
helpful?
Yes
No
Thursday, August 27th, 2015 AT 6:27 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
If the keyway is broken normally you can get a small punch and tap it out as it's not flat on the bottom if the keyway is damaged sideways then you'll need to replace crank. Just don't be a gorilla and use a smaller hammer for the punch. Use penetrating oil as well.
Was this
answer
helpful?
Yes
No
Thursday, August 27th, 2015 AT 6:42 AM
Tiny
ROBERT12801
  • MEMBER
  • 9 POSTS
Can I get a crankshaft key-way replacement meant for a Chrysler 2002 2.7 liter?If so please tell me how thank you very much
Was this
answer
helpful?
Yes
No
Thursday, August 27th, 2015 AT 5:08 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Auto parts store or dealer
Was this
answer
helpful?
Yes
No
Thursday, August 27th, 2015 AT 5:27 PM
Tiny
ROBERT12801
  • MEMBER
  • 9 POSTS
Tried and got no where. Called all over no one knows anything or has nothing and cant tell you nothing even called Chrysler dealer its self and got no where. And called junk yards and nothing.
Was this
answer
helpful?
Yes
No
Tuesday, September 15th, 2015 AT 10:49 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Well i'm not that familiar with those engines. But I do know if timing belt broke the engine is junk and best is to replace it as it bends valves and does other damage as well. Ilooked around and found this that there is a keyway seepic. You may hav eto replace crank to fix it or another engine.
Was this
answer
helpful?
Yes
No
Tuesday, September 15th, 2015 AT 12:16 PM
Tiny
ROBERT12801
  • MEMBER
  • 9 POSTS
Can you tell me how to tell if the engine in a Chrysler 2.7 4 door sadan is egr equipped?
Was this
answer
helpful?
Yes
No
+1
Friday, September 18th, 2015 AT 12:24 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Yes it is.
Was this
answer
helpful?
Yes
No
Friday, September 18th, 2015 AT 12:56 PM
Tiny
ROBERT12801
  • MEMBER
  • 9 POSTS
Would a 03 04 SEBRING ENGINE 2.7L 1983115
work on a Chrysler sebring 2.7l 2002 4 door sedan?
Was this
answer
helpful?
Yes
No
Friday, September 18th, 2015 AT 10:49 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
It should make sure it has all the same sensors as the old engine and correct hookups at sensors. And mount should be in same place.
Was this
answer
helpful?
Yes
No
Saturday, September 19th, 2015 AT 5:59 AM
Tiny
ROBERT12801
  • MEMBER
  • 9 POSTS
On a Chrysler sebring 2.7l 2002 4 door sedan lx model can u tell me if that is egr valve equipped? The vin number is.1c3eL46r02n199281
Was this
answer
helpful?
Yes
No
Sunday, September 20th, 2015 AT 3:03 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
I already confirmed that in a few other replies ago.
Was this
answer
helpful?
Yes
No
Sunday, September 20th, 2015 AT 3:23 PM
Tiny
ROBERT12801
  • MEMBER
  • 9 POSTS
Sorry
Was this
answer
helpful?
Yes
No
Sunday, September 20th, 2015 AT 3:29 PM

Please login or register to post a reply.

Sponsored links