i change both o2 sensor front and rear. head gas kit. fuel pressur is okey.both cat is okey. campsaft is working good.
Dec 10, 2011 at 3:16 AM
having code p0172, p0175
2002 CHRYSLER INTREPID
DEEPAKKHAMBA
- MEMBER
- 2 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
P0172= 1/1 fuel system rich.
P0175= 2/1 fuel system rich.
You probably know this, but rich means too much fuel. Or, not enough air. When was the last time you changed the air filter?
I would suspect something like a leaking fuel injector or a faulty MAP sensor not generating a code. Check the plugs, coil(s), and wires.
P0175= 2/1 fuel system rich.
You probably know this, but rich means too much fuel. Or, not enough air. When was the last time you changed the air filter?
I would suspect something like a leaking fuel injector or a faulty MAP sensor not generating a code. Check the plugs, coil(s), and wires.
Dec 10, 2011 at 3:25 AM
Advertisement
1.Excessive fuel pressure can be cause by restricted fuel return line
2.Defective Oxygen Sensors.
3.Leaking injectors and fuel pressure regulator.
4.Coolant temperature sensor out of calibration.
5.Restricted air intake system
2.Defective Oxygen Sensors.
3.Leaking injectors and fuel pressure regulator.
4.Coolant temperature sensor out of calibration.
5.Restricted air intake system
Dec 10, 2011 at 3:33 AM
Hi,
How would i know, i need to change my fuel injector.
How would i know, i need to change my fuel injector.
Dec 12, 2011 at 8:35 AM
Go to this link for more information: http://www.ecs.fullerton.edu/~sowell/jag/fuelingsys/testrig/InjectorTestRig.pdf
Dec 12, 2011 at 9:46 AM