i have a chrysler 300m with a heating problem.new functioning thermostat,temp.sensor replaced.blower works fine .no bad fuses
Feb 17, 2011 at 3:41 PM
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
JACOBANDNICKOLAS
AUTOMOTIVE REPAIR CONTRIBUTOR
110,190 POSTS
With the engine running, at normal operating temp, and the heater on high, feel both heater core hoses. Both should be hot. If they are, check and repair the blend door. If only one is hot, try flusihing the heater core.