SPONSORED LINKS

2002 Chevrolet Suburban ECM B Fuse

Tiny
ISAAC TRESSLER
  • MEMBER
  • 2002 CHEVROLET SUBURBAN
  • 6.0L
  • V8
  • 4WD
  • AUTOMATIC
  • 200,000 MILES
The ECM B fuse keeps blowing as soon as you turn on the key. I put a 25 or 30 amp fuse and it blows.
Tuesday, July 7th, 2015 AT 6:21 AM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
This fuse powers only the pcm so check for a short on the orange wire leading to pcm or bad connection or pcm. A pro will need to install pcm because of security system. You probably have water intrusion into pcm.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Tuesday, July 7th, 2015 AT 6:37 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
You might also try unplugging all the injectors and see if it still blows.

When a circuit powers the PCM, it in turn powers everything that the PCM powers
Was this
answer
helpful?
Yes
No
+1
Tuesday, July 7th, 2015 AT 7:02 AM

Please login or register to post a reply.

Related Engine Computer Fuse Content

Engine Control Module (PCM) Fuse
VIDEO
Engine Control Module (PCM) Fuse
Instructional repair video
Engine Computer Fuse Fails
GUIDE
Engine Computer Fuse Fails
Each manufacturer designs their engine wiring systems a little differently, but one thing that stays the same is what an engine fuse supplies power to, such as the engine...
VIEW MORE

Sponsored links