manual window crank broke inside door panel. how do i fix it?
Jul 11, 2011 at 3:20 PM
manual window crank broke?
2002 CHEVROLET SILVERADO
BURR765
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
You can remove the handle by just removing the clip but if you broke the crank on the regulator, you will have to remove the door panel.
Here is a link that will help with this:
https://www.2carpros.com/articles/door-panel-removal
I attached the process on how to replace just the handle if that is what is broken.
If you need to replace the regulator then here is a guide for that. Clearly you can ignore the motor part of this.
https://www.2carpros.com/articles/how-to-check-and-replace-a-electric-power-window-motor
Let me know if there are questions. Thanks
Here is a link that will help with this:
https://www.2carpros.com/articles/door-panel-removal
I attached the process on how to replace just the handle if that is what is broken.
If you need to replace the regulator then here is a guide for that. Clearly you can ignore the motor part of this.
https://www.2carpros.com/articles/how-to-check-and-replace-a-electric-power-window-motor
Let me know if there are questions. Thanks
Images (Click to enlarge)
Dec 10, 2020 at 1:28 PM
Advertisement