when i switch my high beams on the passenger side is really bright and the driver side is really dim
Jul 22, 2012 at 9:43 PM
what would cause a passenger bright high beam and a dim driver side high beam
2002 CHEVROLET CAVALIER
CSPERLAZZA
- MEMBER
- 11 POSTS
- FOLLOW
Advertisement
Have the DRL relay, Body Control Module and MultiFunction switch checked/tested-
Jul 22, 2012 at 9:54 PM
DRL relay and hte Multifuction switch have been replaced how would i got about testing the BCM?
Jul 22, 2012 at 10:02 PM
Advertisement
Also check the left hand fuse-
Jul 22, 2012 at 10:03 PM
fuses are fine
Jul 22, 2012 at 10:05 PM
How do i check and test the bcm?
Jul 22, 2012 at 10:06 PM
Try adding. Ground on the drk blue wire and on the pnk that heads to the turn signal switch term a and c . See if the light gets bright then
Jul 22, 2012 at 10:11 PM
You probably have to bring it in to the dealership and have it tested-
Jul 22, 2012 at 10:12 PM
DJCL- am i running two wires one from the drk blue to A and one from the pink to B?
Jul 22, 2012 at 10:34 PM
i mean pink to c
Jul 22, 2012 at 10:36 PM
Have you fix the problem-Let me know
Jul 25, 2012 at 8:36 PM
no i have not fixed the problem. have tried everything i still have a dim driver side high beam, no drl, and very very dim low beams.
Jul 25, 2012 at 10:23 PM
Did you jump the 2 wires to ground ?
Jul 26, 2012 at 9:28 AM
yes and it made my lights get stuck on.
Jul 26, 2012 at 7:05 PM
If you supply aseperet power and ground and the bulb is good it has to work.
Jul 27, 2012 at 1:02 AM