2002 Chevrolet Cavalier What could it be?

2002 CHEVROLET CAVALIER
212,000 MILES • 4 CYL • AUTOMATIC
Avatar
MUSTANG67MH
  • MEMBER
  • 11 POSTS
2002 Chevrolet Cavalier What could it be?
I have a 2002 Chevy Cav. sometimes the speed indicator will start jumping around and the car will shift up and down. most of the time it is fine. it only does this when the speed ind. starts jumping. What is the problem? It has a new speed senor.



Sep 14, 2011 at 2:35 PM
Advertisement
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
there is a gear on the sensor that is plastic and dishes in the center that causes the type of issue you are describing. have it checked to verify.

Roy
Sep 14, 2011 at 3:15 PM
Avatar
MUSTANG67MH
  • MEMBER
  • 11 POSTS
What sensor? In the speedmeter? Thanks
Sep 14, 2011 at 4:41 PM
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
no, in the transaxle. after you remove the sensor, it will be on the end of the sensor.

Roy
Sep 14, 2011 at 4:54 PM
Avatar
MUSTANG67MH
  • MEMBER
  • 11 POSTS
There is no gear on the end of sensor. It is magnetic. Thanks
Sep 14, 2011 at 5:58 PM
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
is this the sensor that was replaced?? if it was, make sure the connector is good and apply some di electric grease. it could be as simple as a bad connection.

if not, you will need help from a shop with a scan tool to monitor the signal going to the pcm.

Roy
Sep 14, 2011 at 8:44 PM
Avatar
MUSTANG67MH
  • MEMBER
  • 11 POSTS
Thank you.
Sep 15, 2011 at 10:57 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.