Is there a written report on R & R a windshield washer Reservour on a 2002 Chevy Blaser. I am pretty sure that it's is cracked on the bottom.
Feb 21, 2011 at 8:49 PM
Windshield washer Tank
2002 CHEVROLET BLAZER
H20PIGRET
- MEMBER
- 1 POST
Advertisement
MERLIN2021
- ✓ASE Certified Mechanic
- 17,250 POSTS
WASHER PUMP/RESERVOIR REPLACEMENT
Removal Procedure
1. Remove the washer solvent from the solvent container.
2. Disconnect the electrical connectors from the washer pumps.
3. Disconnect the hoses from the washer pumps.
Fig. 29: Locating Washer Pumps Hoses
Courtesy of GENERAL MOTORS CORP.
4. Remove the screw and the solvent container from the vehicle.
Fig. 30: Locating Solvent Container Screw
Courtesy of GENERAL MOTORS CORP.
5. Remove the washer pumps and grommets from the solvent container.
Fig. 31: Locating Solvent Container Washer Pumps & Grommets
Courtesy of GENERAL MOTORS CORP.
Installation Procedure
1. Install the washer pumps and grommets onto the solvent container.
Fig. 32: Locating Solvent Container Washer Pumps & Grommets
Courtesy of GENERAL MOTORS CORP.
2. Install the solvent container onto the vehicle with the screw.
Tighten
Tighten the screw to 3 N.m (27 lb in).
Fig. 33: Locating Solvent Container Screw
Courtesy of GENERAL MOTORS CORP.
3. Connect the hoses to the washer pumps.
4. Connect the electrical connectors to the washer pumps.
5. Refill the washer solvent in the solvent container.
Removal Procedure
1. Remove the washer solvent from the solvent container.
2. Disconnect the electrical connectors from the washer pumps.
3. Disconnect the hoses from the washer pumps.
Fig. 29: Locating Washer Pumps Hoses
Courtesy of GENERAL MOTORS CORP.
4. Remove the screw and the solvent container from the vehicle.
Fig. 30: Locating Solvent Container Screw
Courtesy of GENERAL MOTORS CORP.
5. Remove the washer pumps and grommets from the solvent container.
Fig. 31: Locating Solvent Container Washer Pumps & Grommets
Courtesy of GENERAL MOTORS CORP.
Installation Procedure
1. Install the washer pumps and grommets onto the solvent container.
Fig. 32: Locating Solvent Container Washer Pumps & Grommets
Courtesy of GENERAL MOTORS CORP.
2. Install the solvent container onto the vehicle with the screw.
Tighten
Tighten the screw to 3 N.m (27 lb in).
Fig. 33: Locating Solvent Container Screw
Courtesy of GENERAL MOTORS CORP.
3. Connect the hoses to the washer pumps.
4. Connect the electrical connectors to the washer pumps.
5. Refill the washer solvent in the solvent container.
Images (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Feb 21, 2011 at 8:53 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.