ABS

Tiny
REMARK1291
  • MEMBER
  • 2002 CADILLAC ESCALADE
  • V8
  • 2WD
  • AUTOMATIC
2002 cadillac escalade abs light is on and I realize that the back brakes lock up. It feels that the front brakes are not working.
Friday, December 10th, 2010 AT 1:52 AM

6 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
You can repair any obvious brake problems but you are going to have to get the ABS module scanned to determine what fault put it on.
Was this
answer
helpful?
Yes
No
Friday, December 10th, 2010 AT 2:04 AM
Tiny
REMARK1291
  • MEMBER
  • 4 POSTS
Thank you, upon checking the brake system, there is no obvious brake problems with the brakes. If the ABS module is scanned will it show it is defective. A mechanic, who checked it out, told me that the "ABS pump" is the problem. I don't want to remove and replace parts to try and fix it and get to the right part first time. Any other suggestions or ways to narrow the part problem
Was this
answer
helpful?
Yes
No
+1
Friday, December 10th, 2010 AT 3:07 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
The ABS light being on indicates that the system has detected a malfunction and stored a code to identify it. That's where everything has to start.
Was this
answer
helpful?
Yes
No
-1
Friday, December 10th, 2010 AT 3:11 AM
Tiny
REMARK1291
  • MEMBER
  • 4 POSTS
Thanks again. I will have the code checked and go from there.
Was this
answer
helpful?
Yes
No
Friday, December 10th, 2010 AT 3:17 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
Don't waste your time at the free parts stores. This is going to require a professional scan tool to access these codes.
Was this
answer
helpful?
Yes
No
Friday, December 10th, 2010 AT 3:19 AM
Tiny
REMARK1291
  • MEMBER
  • 4 POSTS
I have a professional mechanic that I use for these things.

Thanks
Was this
answer
helpful?
Yes
No
Friday, December 10th, 2010 AT 3:25 AM

Please login or register to post a reply.

Sponsored links