2002 Buick Rendezvous Engine acceleration problem?

Tiny
JOSHAUHOOVER304
  • MEMBER
  • 2002 BUICK RENDEZVOUS
  • 3.4L
  • 6 CYL
  • AWD
  • AUTOMATIC
Vehicle bucks and jerks while trying to accelerate car md scanner gives me codes p0300, p1635, p0131, have changed spark plugs, coil packs, tps, map maf, fuel pressure regulator, fuel filter, egr solenoid, none of which has fixed the problem. The car idles fine, but does have a slight miss.
Saturday, February 7th, 2015 AT 1:12 PM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check for a vacuum leak then due to the misfire code these are very hard to diagnose and the others may be coming on due to the misfire.
Was this
answer
helpful?
Yes
No
Sunday, February 8th, 2015 AT 8:39 AM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,536 POSTS
Misfire to misfire very good! With these codes it looks like the PCM has gone bad or you have a shorted oxygen sensor for bank one sensor one.

P0300 - Random/Multiple Cylinder Misfire Detected:

P1635 - 5 Volt Reference Circuit: This code indicates a problem with the 5-volt reference circuit

P0131 - O2 Sensor Circuit Low Voltage (Bank 1, Sensor 1)

I would swap out the oxygen sensor and then clear the codes to see what happens. Here is the location of the sensor so you get the right one. Check out the images (below). Please let us know what happens.
Was this
answer
helpful?
Yes
No
Saturday, July 13th, 2024 AT 4:04 PM

Please login or register to post a reply.

Sponsored links