No power when the inition switch is turned to the on position. Replaced Battery

Tiny
JASTAD123
  • MEMBER
  • 2001 TOYOTA TUNDRA
  • 130,000 MILES
Hello,

I have a 2001 Toyota Tundra with a 3.4L. I let the truck sit for 3 days and when I got in it today to start it up I have no power at all when the key is turned to the on position or start position. When the key is in the off position the door adjar light is on but goes out when the key is turned to the on or start position. I replaces the battery today and I still do not have anything. I checked the main fuse in the fuse block and it looks good. What should I check next? Ignition switch, starter relay?
Thursday, December 8th, 2011 AT 10:39 PM

4 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,747 POSTS
Check wiring to the main fuse box under the hood. Make sure battery terminals are clean, tight, and in good condition.
Was this
answer
helpful?
Yes
No
+1
Thursday, December 8th, 2011 AT 10:42 PM
Tiny
JASTAD123
  • MEMBER
  • 2 POSTS
I already did. I put new terminals on when I installed the new battery
Was this
answer
helpful?
Yes
No
Thursday, December 8th, 2011 AT 10:44 PM
Tiny
TUNDRA OWNER
  • MEMBER
  • 1 POST
I would like the answer to this question as well, having same problems and even the toyota dealership said they weren't sure of what the problem was?
Was this
answer
helpful?
Yes
No
Saturday, December 10th, 2011 AT 11:23 PM
Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
Jastad123, how many volts is the battery generating? Check the fuse panel, see if there is power present there, as well.
Was this
answer
helpful?
Yes
No
Monday, January 2nd, 2012 AT 1:56 AM

Please login or register to post a reply.

Sponsored links