When I shift into Reverse, there are no reverse lights but the gear does engage. What is the problem?
Tuesday, October 4th, 2011 AT 5:41 PM
5 Replies
SATURNTECH9
MECHANIC
30,869 POSTS
Do you have a manual or automatic transmission?Also do you have a multimeter?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, October 4th, 2011 AT 5:50 PM
MCCU5217
MEMBER
3 POSTS
It is a manual transmission. I am unsure if I have a multimeter
Was this
answer
helpful?
Yes
No
Tuesday, October 4th, 2011 AT 6:17 PM
SATURNTECH9
MECHANIC
30,869 POSTS
A mulimeter is a volt meter that also tests ohms etc?I figured its a stick under the master cylinder area you will see a connector on the transmission shift tower unplug the connector. Then jump the two terminals together then turn your key to the run position are the back up lights on?
Was this
answer
helpful?
Yes
No
Tuesday, October 4th, 2011 AT 6:39 PM
MCCU5217
MEMBER
3 POSTS
When I took off the center console and saw the two gear cables, there was no other connector on the actual gear shifter. The gears are laid out to where the R is far bottom right. I can look under the car at the transmission, I just don't know where to look. I heard something about having a back-up switch that is not engaged.
Was this
answer
helpful?
Yes
No
Tuesday, October 4th, 2011 AT 6:42 PM
SATURNTECH9
MECHANIC
30,869 POSTS
Iam talking about under the hood bellow your brake master cylinder area. Its where the cables go on the transmission. Let me know what you find.