2001 Saturn SC2 hi

2001 SATURN SC2
185,000 MILES
Avatar
GMERR23
  • MEMBER
  • 4 POSTS
I have a 2001 Saturn sc2 I am trying to replace the front hub assembly and I just can not get it to come out. And with the new one it has a snap ring the hub and bearing are all apart and I have to put it together and I am not quite sure how to do that I've replaced wheel bearings before but not like this
Aug 22, 2013 at 2:41 PM
Advertisement
Avatar
SATURNTECH9
  • ✓ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
The Bering has to pressed out of the knuckle after removing the snap ring.Then press the new Bering in put the new snap ring in.Then you have to press in the hub which you can use the axle nut to press that in.To doing the Bering you have to remove the knuckle and use a press or get a on car wheel Bering press.
Aug 22, 2013 at 3:07 PM
Avatar
GMERR23
  • MEMBER
  • 4 POSTS
Ok do I have to remove the CV Axle and strut and Tue rod end to do that
Aug 22, 2013 at 7:33 PM
Avatar
SATURNTECH9
  • ✓ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
You don't have to remove the strut you have to pop the lower all joint loose and slide the axle out of the hub.Also of course unhook the outter tie rod rod from the knuckle.If you use a stand up press you have to remove the knuckle from strut.I have a on car wheel bearing press from harbor freight works well.You just have to always turn the nut side and make sure the nut is on the side facing the bearing pushing direction.Using that you won't effect the alignment or have to remove the knuckle from the strut.You can find a 25 or 20 percent off coupon also.
Aug 22, 2013 at 7:56 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.