2001 Saturn SC1, where is the access to remove the rear shock from the top.

2001 SATURN SC1
150,000 MILES
Avatar
JOHNSHWIN
  • MEMBER
  • 1 POST
2001 Saturn SC1, where is the access to remove the rear shock from the top. what should be dismantled? what is the easiest way to access the top rear struts? thanks
Jul 31, 2012 at 5:09 PM
Advertisement
Avatar
DOCFIXIT
  • ASE Certified Mechanic
  • 18,828 POSTS
  • ASE Certified Mechanic
Remove left and right window molding, fold rear seat down, remove carrier shelf speaker grills, seat belt bezel and belts then shelf and carpet. remove three mounting nuts. DO NOT LOOSEN CENTER NUT.Spring strut under extreme pressure will need strut compressor
Jul 31, 2012 at 5:45 PM
Avatar
SATURNTECH9
  • ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
Just to add this there is no need to remove the whole rear package tray.You can just pop up the side your working on and sneak your hand in the there.I have done it many times pop thr verticle bolster cushion loose that is next to the seat back that folds down.Remove the hold down clip for the rear package tray and the clip up by the back glass.Then fold the rear package off of the seat striker and ou should be able to get your hand in there.The rear package tray is pretty flexiable.
Aug 1, 2012 at 5:28 PM
Avatar
SATURNTECH9
  • ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
Sorry if you pop both sides loose like i said on the one side you dont dont have to remove the rear package tray.It will be a time saver and your probably replacing both sides anyways.
Aug 1, 2012 at 5:45 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.