2001 Renault Megane ABS module

Tiny
COL1971
  • MEMBER
  • 2001 RENAULT MEGANE
  • 1.6L
  • 4 CYL
  • FWD
  • MANUAL
  • 79,800 MILES
If I replace the abs module an the pump at the same time from a used car do, s the abs module need to be recripted to the new car or because the pump comes with the used abs module do, s this mean it do, s not need to be recripted to the new car thanks. I done a multimeter test on the abs module on my car on pin 23 for the speedo an it was dead no power from the abs module to the speedo, I also put a new wire from pin 23 on the abs module to pin 23 on the speedo an still no joy, the speedo sensor on the front left wheel is ok an there is on lights on the dash from the abs when the engine is runing but still no speedo, checked all other wires to the ecu an all ok an fuses too.
Wednesday, June 4th, 2014 AT 11:21 AM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
All modules are vin specific to vehicles. We have no info on this car but it's probably why you are having the problem. The brake system should also be bled with a scanner hooked up as well since the abs has been replaced.
Was this
answer
helpful?
Yes
No
Wednesday, June 4th, 2014 AT 12:03 PM

Please login or register to post a reply.

Sponsored links