Camshaft and timing chain marks and timing?

seepic for marks/location

Thanks

how to set timing marks for the timing chain?

here is the timing marks if that is what you were needing..

i have a 2000 pontiac grand am i need timing chain diagram

here ya go this is for a 3.4L as you didn't give engine size 2nd one with 2 cams is for a 2.4L next time give engine size..

how to set timing marks?

Hello,

Here is the timing marks for the timing chain and camshafts. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

I replaced the water pump and afterward I set the timming wrong and broke the valves on two cylinder I had them replace and attempted to reset the timming but when I try to turn the engine over by hand it will only turn about a 180 degree turn

Pay a close tension to the guides and tensioner recheck timing marks again

where do i find the timing marks on a 2.4 ltr dual overhead cam

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

i changed a blown head gasket. and i can't get the timing right. no compression. rocker arm cover say's quad 4, but it is not a quad 4. it is one of those quads that were only put in 2% of the vehicles, so i can't find a book or info on it.i need help to get it going. please! i'm a electrician if anyone needs answers on that subject.

This is the timing marks hope it's what you're looking for let me know

What are the specificationns for the timing chain marks on a 2 cam, engine?

Hello, Here is the timing alignment....