2001 Oldsmobile Intrigue Intrigue 6 Cyl Starting Battery Fine Replaced Month

2001 OLDSMOBILE INTRIGUE
148,000 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
My 2001 Oldsmobile Intrigue, 6 cyl, is not starting. The battery is fine as it was replaced a month or two ago, and the alternator was checked at that time as well. My lights, radio, windows, wipers will work fine, but when I turn the key in the ignition ... nothing. The engine doesn't even try to turn over.

This is a fairly recent problem, only the last month or so, and typically the car will decide to start up later for no apparent reason. Unfortunately, it's been almost 5 days now and the car still isn't starting.

A side issue that may be related is that the car has a history of losing RPM's while I'm driving it. It's always within the first 5 miles or 10 minutes. If I'm at a stop or coasting the car will die and be difficult to start; if I'm using the gas I can usually floor it (even though the speed doesn't increase) and this will keep the car from dying on me, and it won't be an issue for the rest of the drive.

Any suggestions or insights would be useful. Please keep in mind that I'm far from a car junkie, I'm just trying to do some research so that I don't get ripped off by the mechanic. Thank you!
Jan 4, 2013 at 10:46 PM
Advertisement
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
i would bet on the starter motor has failed. try tapping it with a hammer to see if it makes it run

Roy
Jan 5, 2013 at 1:26 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.