2001 Oldsmobile Aurora air in the heating system

2001 OLDSMOBILE AURORA
143,358 MILES • 3.5L • V6 • FWD • AUTOMATIC
Avatar
ANTHONY BAUER
  • MEMBER
  • 3 POSTS
i changed the waterpump,and got most of the air out...but now there is a gergiling sound inside the car when the engine is at temp...i am a 100% disabled army veteran of desert storm...i have no money at this time, i get paid once a month...could you please just this one time help???
Jan 22, 2015 at 7:35 AM
Advertisement
Avatar
WRENCHTECH
  • ASE Certified Mechanic
  • 20,761 POSTS
  • ASE Certified Mechanic
You probably still have some air in the system. We generally use vacuum to fill the system to avoid that. The best thing to try is to go through a couple complete drive cycles from full operating temp to total cool down and then check the level again when cold.
Jan 22, 2015 at 9:25 AM
Avatar
ANTHONY BAUER
  • MEMBER
  • 3 POSTS
Yup...I've done that...no luck...and the level in the surge tank has not dropped any...
Jan 22, 2015 at 10:32 AM
Avatar
WRENCHTECH
  • ASE Certified Mechanic
  • 20,761 POSTS
  • ASE Certified Mechanic
Did you remove any heater hoses for any reason?

Have you tried making sure the AC is off. It may run in defrost mode.
Jan 22, 2015 at 1:10 PM
Avatar
ANTHONY BAUER
  • MEMBER
  • 3 POSTS
Nope...did not remove any hoses...and made sure the a/c was off...
Jan 22, 2015 at 1:15 PM
Avatar
WRENCHTECH
  • ASE Certified Mechanic
  • 20,761 POSTS
  • ASE Certified Mechanic
You still have air in the system.
Jan 22, 2015 at 3:15 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.