2001 Mercury Sable Door repair

2001 MERCURY SABLE
78,055 MILES
Avatar
GENARO832
  • MEMBER
  • 1 POST
I crashed the rear door amd got a big dent in it. I want to just bang it out so I took off the rear panel to get a clear view of it but theres only a small opening to the door. Is there anything else I can do or take off to get a clear shot? Thanks for your time.
Oct 9, 2013 at 2:31 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
JDL
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 16,098 POSTS
I'm not a body person, but you can get a body tool that may help you pull the dent out from the outside. It's a slide hammer with a small screw on it. You drill a small hole in outside of door, screw the tool in, use slide hammer to pull out the dent as much as possible. You may have to drill more than one hole. At the end you may need to use some body filler to smooth it out? Sand it, primer and paint it.

Another option may be to get a decent door from the salvage yard that will fit your vehicle.
Oct 9, 2013 at 3:16 PM
Advertisement