My wipers stopped working

VTECH

MEMBER
2001 MAZDA B3000
6 CYL
2WD
AUTOMATIC
66,500 MILES

Hi, my trucks windshield wipers have stopped working along with the interior light. I am wondering if switching out some fuses would fix it or is there anything else that might be the issue?

Monday, March 28th, 2011 AT 1:40 PM

5 Replies

KHLOW2008

MECHANIC
41,814 POSTS

Start by checking the fuses first, after all that is the easiest thing to do.

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

-1

Tuesday, March 29th, 2011 AT 3:03 PM

DAVID DONALD2

MEMBER
2 POSTS
2001 MAZDA B3000
2.5L
6 CYL
2WD
MANUAL
200,000 MILES

No wiper or wind shield washer action. Wiper motor and washer pump work when voltage and ground are connected directly to device. (High speed and low speed) Power at plug for wiper motor. Fuse is good relays are good. Continuity in low speed wiper circuit in vehicle, no continuity in high speed wiper circuit in vehicle.

Will no high speed continuity cause motor not to work?

Was this

answer

helpful?

Yes

No

-1

Thursday, January 5th, 2017 AT 6:40 PM (Merged)

HMAC300

MECHANIC
48,601 POSTS

There are two relays under hood for this one for high/lo and other for park. But you also have a GEM module. So get a mechanic to scan it. It may be the module or even switch on steering column. It may also be the relay which is under hood.

Was this

answer

helpful?

Yes

No

Thursday, January 5th, 2017 AT 6:40 PM (Merged)

DAVID DONALD2

MEMBER
2 POSTS

Thanks HMAC300. That was helpful. Relays are good. The other symptoms that I did not mention in the first post include; dome light and day running lights go on when key is inserted, dome light remains on for ten minutes even after pulling key out. Door ajar light goes on. These symptoms point to the GEM. Your thoughts?

Was this

answer

helpful?

Yes

No

Thursday, January 5th, 2017 AT 6:40 PM (Merged)

HMAC300