SPONSORED LINKS

2001 Mazda B3000 brakes don't work.

Tiny
2CP-ARCHIVES
  • MEMBER
  • 2001 MAZDA B3000
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 96,000 MILES
2001 Mazda B3000 mileage: 96,000. I have a new engine, complete new pads, wheel cylinders, master cylinder, and I can't get a pedal, tried everything! My brakes don't work.
Monday, November 29th, 2010 AT 10:56 PM

2 Replies

Tiny
2CP-ARCHIVES
  • MEMBER
  • 4,540 POSTS
Sounds like you have air in the brake system. Try removing the master cylinder, "bench bleeding" it and then reinstall it and bleed the entire system. If the low pedal still persists, try replacing the rear anti-lock brake valve.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, November 29th, 2010 AT 11:00 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
Did you have this problem before doing the brake work?
Were any calipers removed or replaced?
Was this
answer
helpful?
Yes
No
+2
Monday, November 29th, 2010 AT 11:14 PM

Please login or register to post a reply.

Related Brake Pedal Goes To The Floor Content

Brake Pedal Goes to the Floor
GUIDE
Brake Pedal Goes to the Floor
Experiencing a brake pedal that goes to the floor can be a frightening situation, particularly when you need to stop quickly. The automotive brake system is a hydraulically...
VIEW MORE

Sponsored links