how to change a knock sensor?
Jan 27, 2011 at 7:13 PM
How to change a knock sensor?
2001 KIA RIO
ESEQUIELL
- MEMBER
- 1 POST
Advertisement
RASMATAZ
- ✓ASE Certified Mechanic
- 75,992 POSTS
Here is how to change out the knock sensor
Removal
1.Remove intake manifold support bracket.
2.Disconnect wire harness.
3.Loosen bolt and remove sensor.
Installation
1.Install sensor and tighten bolt.
2.Install wire harness.
3.Reinstall intake manifold support bracket.
Check out the images (Below). Please let us know if you need anything else to get the problem fixed.
Removal
1.Remove intake manifold support bracket.
2.Disconnect wire harness.
3.Loosen bolt and remove sensor.
Installation
1.Install sensor and tighten bolt.
2.Install wire harness.
3.Reinstall intake manifold support bracket.
Check out the images (Below). Please let us know if you need anything else to get the problem fixed.
Images (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Mar 20, 2011 at 2:38 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.