2001 hyundai elentra rpm doesnt rev above 3000 rpm. Error codes:
P0335 crankshaft position sens mal
P1372 segment time incorrect
P0340 camshaft posi. Sensor mal
P0123 throttle position sens-high input
Monday, March 28th, 2011 AT 2:06 PM
4 Replies
KHLOW2008
MECHANIC
41,814 POSTS
Was any repairs carried out prior to this occurring?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, March 29th, 2011 AT 3:09 PM
NABEEL_IQBAL86
MEMBER
2 POSTS
Yes, the engine was replaced, refurbrished engine was installed.
Was this
answer
helpful?
Yes
No
Wednesday, March 30th, 2011 AT 6:41 AM
KHLOW2008
MECHANIC
41,814 POSTS
Recheck the wire harnesses and connections for the cam and crank sensors.
Symptoms indicates the timing belt is most likely out of sync between the camshafts and crankshafts. Check the timing belt markings and ensure they are correct.
Was this
answer
helpful?
Yes
No
-1
Wednesday, March 30th, 2011 AT 9:07 PM
PLATINUMHYUNDAITECH
MEMBER
29 POSTS
Either the timing belt is off time. Or the cam chain wich drives the second cam was not lined up properly.