need help see details for whole question

2001 HONDA CIVIC
12,000 MILES
Avatar
ELIZABETHCHUNGHOONPALAU
  • MEMBER
  • 5 POSTS
i have a 2001 honda civic 2 door 5 speed. we just changed the cluch because it went out and after putting everything back together and we started the car and took it for a test drive, it ran good for the first 5mins of driving then after all the gages stoped working and the idle wont go past 3 grams like there is a rev limitor on it or somthing. also the cooling fans dont work as well. they also changed part under the steering wheel but still no change.
Aug 18, 2012 at 10:37 AM
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
they may have pinched wires in the process. did you return it to them to let them make it right??

Roy
Aug 18, 2012 at 10:41 AM
Avatar
ELIZABETHCHUNGHOONPALAU
  • MEMBER
  • 5 POSTS
we did it our self
Aug 18, 2012 at 10:46 AM
Avatar
ELIZABETHCHUNGHOONPALAU
  • MEMBER
  • 5 POSTS
when u shake they key when it was on it would turn on the gages, and the cooling fan and would idle good then u shake it again it would go off so they change the part put still no change
Aug 18, 2012 at 10:50 AM
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
who is they???

what exactly did they replace??

is the battery working??

Roy
Aug 18, 2012 at 10:54 AM
Avatar
KHLOW2008
  • ✓Experienced Mechanic
  • 41,812 POSTS
Is the MIL indicating?
Aug 18, 2012 at 11:00 AM
Avatar
ELIZABETHCHUNGHOONPALAU
  • MEMBER
  • 5 POSTS
my BF they replaced the whole cluch, had the fly wheel shaved. the battery is working we had a machanic ( who lives next door come and check all the sensors said all was good and working and also checked the battery said was working)
the part by the steering wheel that was change was the switch commutateur interruptor the BF installed it last night and still nothing change still the same
Aug 18, 2012 at 11:05 AM
Avatar
ELIZABETHCHUNGHOONPALAU
  • MEMBER
  • 5 POSTS
yes
Aug 18, 2012 at 11:06 AM
Avatar
KHLOW2008
  • ✓Experienced Mechanic
  • 41,812 POSTS
Get a scan done to check for trouble codes and let us know what it is. When trouble codes are triggerred they can cause the rev limiter to be activated.
Aug 18, 2012 at 11:14 AM
Avatar
ELIZABETHCHUNGHOONPALAU
  • MEMBER
  • 5 POSTS
ok will try that
Aug 18, 2012 at 11:27 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Ask a new question

Frequently Asked Problems for This Vehicle