2001 GMC Sonoma ABS/Brake Light/Cruise Control

2001 GMC SONOMA
246,000 MILES
Avatar
RPERRY706
  • MEMBER
  • 2 POSTS
My code is, CO265,CO251,CO246,CO242,CO252,CO245,CO241,CO281 and CO223. As read by parts house Scanner. The ABS light stays on and so does my Brake light. Also the Cruise doesn't work. I am wondering will the ABS cause brake light to come on and not allow the cruise to work? I did some bearing repair on the front Driver wheel. Afterwards the lights went out for a couple days and now it stays on again. Tried to read the codes but I hit a blank wall. Could you be so kind as to direct me in the right direction to fix this problem? I received no codes for the engine.

Robert
Aug 5, 2013 at 5:09 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
check battery first for condition and load test.it looks like a bad abs unit as most of those codes are for that hav ealocal pro look at it and show him what you have he can give you a better opinion. they can be rebuilt. but yo may have some broken wires or bad sensors due to repair you made.
Mar 13, 2021 at 6:35 PM
Advertisement
Avatar
RPERRY706
  • MEMBER
  • 2 POSTS
Thank You. Good to get a second opinion.
Robert



Mar 13, 2021 at 6:35 PM