I changed the injecter, but no fuel seems to reach into the injector to start the vehicle. The topend is from another car which was working fine.
Jul 12, 2014 at 12:24 PM
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
RASMATAZ
CAR REPAIR CONTRIBUTOR
75,992 POSTS
Computer might not be pulsing the injectors-Also check fuel pressure
Jul 12, 2014 at 1:14 PM
Advertisement
JEWELCARVALHO
MEMBER
8 POSTS
New fuel pump, pressure fuel ok. Fuel goes to the top of engine, but do not inject fuel into the injectors. When spraying with either, car will start, then dies. Computer is brand new, and has been proframmed.
Jul 12, 2014 at 1:19 PM
JEWELCARVALHO
MEMBER
8 POSTS
I have a code 1336 from the obd diagnostic. What and where is it
Jul 12, 2014 at 2:56 PM
JEWELCARVALHO
MEMBER
8 POSTS
What and location of diagnostic code p1336pd. Is their a diagram for this?
Jul 12, 2014 at 5:14 PM
RASMATAZ
CAR REPAIR CONTRIBUTOR
75,992 POSTS
Best recheck the computer might be the wrong one-The injectors are not pulsing