2001 Ford Windstar No heat in

150,000 MILES • 3.8L • 6 CYL • FWD • AUTOMATIC
Avatar
2001WINDSTARHEATER
  • MEMBER
  • 1 POST
I have no heat in my 2001 Windstar.
Replaced thermostat, coolant full. Removed blend door actuator door assembly and seems ok. Manually used lever to turn blend door and no heat in front or rear system when temp gauge between Hot and cool with engine running for 10 minutes?

Core plugged?
Is there more than one core?
Dec 30, 2014 at 9:08 AM
Advertisement
Avatar
CARADIODOC
  • ✓Experienced Mechanic
  • 34,413 POSTS
Feel the two heater hoses after the engine is warmed up. They should be too hot to hold onto for very long. If they're cool, feel the upper radiator hose. If it is cool, and the engine appears to be running too hot, you might suspect a leaking cylinder head gasket. That will allow combustion gases to sneak into the cooling system where it can pool under the thermostat. Thermostats have to be hit with hot liquid to open. Hot air won't do it.

If that looks like what's happening, there's a chemical test your mechanic can do to verify it. That involves drawing air from the radiator through a glass cylinder with two chambers partially-filled with a special dark blue liquid. If combustion gases are present, the liquid will turn bright yellow.
Dec 20, 2016 at 10:11 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle