drive train problem

2001 FORD RANGER
130,000 MILES • 4.0L • 6 CYL • 4WD • AUTOMATIC
Avatar
SUPERWELDER
  • MEMBER
  • 1 POST
no reverse, I can't get it into gear?
Nov 15, 2014 at 11:19 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
CARADIODOC
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 34,308 POSTS
Would you care to elaborate on that just a little?
Nov 15, 2014 at 11:33 AM
Advertisement
Avatar
SUPERWELDER
  • MEMBER
  • 1 POST
it started by having play in my linkage some time ago.and now it won't go in to reverse.i kept shifting it back and forth, if it is goining in gear it's not moving.it happend yesterday,but i kept shifting it and it worked fine the rest of the day
Nov 15, 2014 at 11:49 AM
Avatar
CARADIODOC
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 34,308 POSTS
Slipping linkage / cable, and loose linkages are the most common cause of not going onto the right gear, but there can also be a problem in the valve body in the transmission, or a broken low / reverse band. Your observations that it shifts properly at times rules out a transmission problem. You're right about the linkage but most likely you'll need to crawl underneath and watch what's moving or slipping while a helper moves the shift lever. Be sure to block the wheels or have a helper you can trust to keep the brakes applied.
Nov 15, 2014 at 1:30 PM