2001 Dodge Ram 1500

108,000 MILES • V8 • 4WD • AUTOMATIC
Avatar
SPANKEY18249
  • MEMBER
  • 5 POSTS
The Truck will crank and not start. There is fuel and spark. I recently put a fuel pump and a Computer in the truck and both seem to be working fine. What can I do next?
Feb 18, 2011 at 6:07 AM
Avatar
MMPRINCE4000
  • ✓Experienced Mechanic
  • 8,548 POSTS
Check the crankshaft and camshaft sensor with a scanner, it must be out of time if you have fuel and spark.
Feb 18, 2011 at 9:58 AM
Avatar
SPANKEY18249
  • MEMBER
  • 5 POSTS
we have checked with a scanner and i'm not getting any codes of any type I did check the gap on one of the spark plugs and it was .070 recommended on the truck is .040 could that be part of the problem?
Feb 18, 2011 at 10:28 AM
Avatar
MMPRINCE4000
  • ✓Experienced Mechanic
  • 8,548 POSTS
Yes, re-gap plugs and post results.
Feb 19, 2011 at 5:45 AM
Avatar
SPANKEY18249
  • MEMBER
  • 5 POSTS
well after checking the gap on the plugs I decided to replace the plugs, wires, distributor cap and rotor when we took of the cap and inspected there was a lot of burning and when the rotor was spinning it was making contact but very limited once all the new components were installed and all other components (cam sensor, ground wires, and connections) the truck started right up and has never run better. Thank you very much for the help it helped a lot.
Feb 19, 2011 at 3:02 PM
Avatar
MMPRINCE4000
  • ✓Experienced Mechanic
  • 8,548 POSTS
Thanks for using 2carpros.........Paul
Feb 21, 2011 at 6:01 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle