2001 Dodge Ram 1500

Tiny
SPANKEY18249
  • MEMBER
  • 2001 DODGE RAM
  • V8
  • 4WD
  • AUTOMATIC
  • 108,000 MILES
The Truck will crank and not start. There is fuel and spark. I recently put a fuel pump and a Computer in the truck and both seem to be working fine. What can I do next?
Friday, February 18th, 2011 AT 2:07 PM

5 Replies

Tiny
MMPRINCE4000
  • MECHANIC
  • 8,548 POSTS
Check the crankshaft and camshaft sensor with a scanner, it must be out of time if you have fuel and spark.
Was this
answer
helpful?
Yes
No
Friday, February 18th, 2011 AT 5:58 PM
Tiny
SPANKEY18249
  • MEMBER
  • 5 POSTS
We have checked with a scanner and i'm not getting any codes of any type I did check the gap on one of the spark plugs and it was.070 recommended on the truck is.040 could that be part of the problem?
Was this
answer
helpful?
Yes
No
Friday, February 18th, 2011 AT 6:28 PM
Tiny
MMPRINCE4000
  • MECHANIC
  • 8,548 POSTS
Yes, re-gap plugs and post results.
Was this
answer
helpful?
Yes
No
Saturday, February 19th, 2011 AT 1:45 PM
Tiny
SPANKEY18249
  • MEMBER
  • 5 POSTS
Well after checking the gap on the plugs I decided to replace the plugs, wires, distributor cap and rotor when we took of the cap and inspected there was a lot of burning and when the rotor was spinning it was making contact but very limited once all the new components were installed and all other components (cam sensor, ground wires, and connections) the truck started right up and has never run better. Thank you very much for the help it helped a lot.
Was this
answer
helpful?
Yes
No
Saturday, February 19th, 2011 AT 11:02 PM
Tiny
MMPRINCE4000
  • MECHANIC
  • 8,548 POSTS
Thanks for using 2carpros. Paul
Was this
answer
helpful?
Yes
No
Monday, February 21st, 2011 AT 2:01 PM

Please login or register to post a reply.

Sponsored links