how do u take off a belt tensenior
Dec 31, 2010 at 5:19 PM
power steering belt tensionor
DOMINIQUEW
- MEMBER
- 1 POST
REMOVAL
NOTE: Slight axial movement of the tensioner arm is normal. Tensioner arm should move freely and maintain 50-70 lb. tension on belt.
1. Remove engine mount bracket assembly.
2. Remove the tensioner pulley mounting bolt.
3. Remove the pulley.
INSTALLATION
1. Install tensioner pulley, dust shield, and bolt. Tighten bolt to 27 Nm (20 ft. lbs.) .
2. Install engine mount bracket assembly.
NOTE: Slight axial movement of the tensioner arm is normal. Tensioner arm should move freely and maintain 50-70 lb. tension on belt.
1. Remove engine mount bracket assembly.
2. Remove the tensioner pulley mounting bolt.
3. Remove the pulley.
INSTALLATION
1. Install tensioner pulley, dust shield, and bolt. Tighten bolt to 27 Nm (20 ft. lbs.) .
2. Install engine mount bracket assembly.
Dec 31, 2010 at 6:38 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.