2001 CHRYSLER TOWN AND COUNTRY
200,000 MILES
Avatar
BLK4020
  • MEMBER
  • 1 POST
the front and rear blower motors were only working on high. then the front blower quit working all together. i replaced the blower motor resistor and now the rear blower works on all settings. but the front blower still does not work. what should i look for next?
Nov 9, 2012 at 12:53 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
DRCRANKNWRENCH
  • CAR REPAIR CONTRIBUTOR
  • 3,380 POSTS
It does happen that blower motors work in high only before failing. I am giving you a walk through diagnsotic for your issue. If it says to get trouble codes pulled or to do any testing. Any Advance Auto or Auto Zone will do this for free and they loan out test kits.
So, use the link below to get to the diagnostic and go through it. You wikll have to back peddle to when the blower motor was tunning on only high to see why it failed and what got it there but the diagnostics are very helpful at process of elimination and really walk you through. So, follow the order in which it is written and let me know what you find.
Here is the link to get to the diagnostic;

https://www.2carpros.com/articles/blower-fan-motor-works-on-high-speed-only
Feb 27, 2021 at 10:24 AM
Advertisement