SPONSORED LINKS

2001 Chrysler Town and Country Replacing Blower Motor

Tiny
DOLSON21
  • MEMBER
  • 2001 CHRYSLER TOWN AND COUNTRY
  • 3.3L
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 235,000 MILES
I can't tell how the very back of the blower motor housing cover is attached.

I've replaced the blower motor on my other Town and Country which is the same year but it's a 3.8. I have removed four screws but there appears (not absolutely sure) to be a fifth mount in the very back. With a mirror I can see that there is a flange but the is no screw. My mechanic suggested that "some vehicles" you have to get at from the top by going throught the dash. Can you confirm this and if so what the steps are to get the dash off (two large sections)?

Thanks!
Dave
SPONSORED LINKS
Sunday, February 9th, 2014 AT 6:03 PM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
The Motor is hung from the bottom, There are 2 screws that are troublesome. 1 is at front rh side and goes from top down, other is at VERY back and hard to get. I pull carpet back then make a slice in the underlay, remove it and it will go back in. This gives you just enough room to get that screw. Careful when removing lower cover as the Blend Door for outside air breaks easy.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Saturday, February 27th, 2021 AT 10:18 AM

Please login or register to post a reply.

Related Blower Fan Replace/Remove Content

How to Replace the A/C Blower Motor
VIDEO
How to Replace the A/C Blower Motor
Instructional repair video
VIEW MORE

Sponsored links