How do you shut off the Change oil light after you change it. on 2001 Chev Ventura Van?
Mar 18, 2011 at 6:48 PM
Change Oil Light
2001 CHEVROLET VENTURE
MAGHEPHNER
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
OIL CHANGE REMINDER RESET - PROCEDURE 1
Tips Click a link to view tip
Tech1Tip: CHANGE OIL LIGHT - 2002 Silverado 1500
Tech1Tip: OIL CHANGE SOON - 2001 Suburban
Turn ignition ON, with engine off.
Fully press and release the accelerator pedal slowly 3 times within five seconds. If the CHANGE ENGINE OIL message flashes, the system is reset.
However, if message stays on, it did not reset. Repeat the procedure.
Turn ignition OFF.
If CHANGE ENGINE OIL message comes back on when engine is started, repeat reset procedure.
Tips Click a link to view tip
Tech1Tip: CHANGE OIL LIGHT - 2002 Silverado 1500
Tech1Tip: OIL CHANGE SOON - 2001 Suburban
Turn ignition ON, with engine off.
Fully press and release the accelerator pedal slowly 3 times within five seconds. If the CHANGE ENGINE OIL message flashes, the system is reset.
However, if message stays on, it did not reset. Repeat the procedure.
Turn ignition OFF.
If CHANGE ENGINE OIL message comes back on when engine is started, repeat reset procedure.
Mar 18, 2011 at 7:05 PM
Advertisement