SPONSORED LINKS

What do the 3 wires go to on the mass air flow sensor

Tiny
STEVEN BALDWIN
  • MEMBER
  • 2001 CHEVROLET TRACKER
  • 135,000 MILES
I, m trying to put a JET air flow relocator on and it has a tan wire and a black wire the plug has 3 wires tan w/blk stripe, blue w/blk stripe and purple w/white stripe witch wire go to what
Wednesday, February 1st, 2012 AT 6:44 PM

8 Replies

Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
Is this what cha got? http://www.autopartswarehouse.com/details/QQChevroletQQTrackerQQJet_PerformanceQQMass_Air_Flow_SensorQQ19992004QQJ2061635.html
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, February 1st, 2012 AT 7:14 PM
Tiny
STEVEN BALDWIN
  • MEMBER
  • 8 POSTS
Yes thats what I have
Was this
answer
helpful?
Yes
No
Wednesday, February 1st, 2012 AT 7:24 PM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
It should just plug in?
Was this
answer
helpful?
Yes
No
Wednesday, February 1st, 2012 AT 7:53 PM
Tiny
STEVEN BALDWIN
  • MEMBER
  • 8 POSTS
The instructions say take black, tan or tan w/black stripe out of old plug on tracker and install in new plug with kit. New plug is 2 wire old is 3 wire and has tan w/black stripe, blue w/black stripe, and purple w/white. I took tan w/blk and hooked to tan and blue wblk to black and drove 1/2 mile and blew 15 amp fuse under hood. Not sure witch to try next?
Was this
answer
helpful?
Yes
No
Wednesday, February 1st, 2012 AT 8:27 PM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
Boy those are lousy instructions? Does it say there is a difference in # of wires? Any luck contacting maker or a forum about it's products?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, February 1st, 2012 AT 10:10 PM
Tiny
STEVEN BALDWIN
  • MEMBER
  • 8 POSTS
When I ordered it it states it's for a 2.5 v6. Contacted Jet and got a foriener he said I hooked it up right. So I'm kinda on my own. The origanal mass air sensor is bad took to a shop and is dealer item only way to get is buy whole throttle body. I've searched the scrap yards and cant find one so I thought this relocator would be the way to go.
Was this
answer
helpful?
Yes
No
Wednesday, February 1st, 2012 AT 10:19 PM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
How about ebay
Was this
answer
helpful?
Yes
No
Thursday, February 2nd, 2012 AT 12:16 AM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
Or keep calling company.
Was this
answer
helpful?
Yes
No
Thursday, February 2nd, 2012 AT 12:19 AM

Please login or register to post a reply.

Related Mass Air Flow Sensor Content

Mass Air Flow Sensor
GUIDE
Mass Air Flow Sensor
A mass air flow sensor can become inaccurate after large amounts of air (high mileage) has passed over the hot wire and must be cleaned before normal operation will return...
VIEW MORE

Sponsored links