suburban pulling to the right while driving

2001 CHEVROLET SUBURBAN
150,000 MILES
Avatar
SWIZZLE84
  • MEMBER
  • 3 POSTS
Also while making a Sharp turn it bounces as if the wheel were jumping back and forth
Nov 12, 2011 at 4:54 AM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Check to make sure the brake caliper isn't sticking. Also, have you checked the alignment, steering components...?
Nov 12, 2011 at 4:58 AM
Avatar
SWIZZLE84
  • MEMBER
  • 3 POSTS
Haven't checked alignment yet I just noticed it. Would that cause the truck to bounce while making a Sharp turn
Nov 12, 2011 at 5:01 AM
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
It shouldn't. However, if you have a brake hanging up, it could. Check to make sure the brake caliper isn't sticking. Safely lift and support the wheel, spin it, have a helper hit the brake, and then see if you can turn the wheel after the brakes are released. If the rotor is overheating, it could be grabbing.
Nov 12, 2011 at 5:04 AM
Avatar
SWIZZLE84
  • MEMBER
  • 3 POSTS
Will do thanks
Nov 12, 2011 at 5:09 AM
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Let us know what you find.
Nov 13, 2011 at 1:54 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.