Also while making a Sharp turn it bounces as if the wheel were jumping back and forth
Nov 12, 2011 at 4:54 AM
suburban pulling to the right while driving
2001 CHEVROLET SUBURBAN
SWIZZLE84
- MEMBER
- 3 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Check to make sure the brake caliper isn't sticking. Also, have you checked the alignment, steering components...?
Nov 12, 2011 at 4:58 AM
Advertisement
Haven't checked alignment yet I just noticed it. Would that cause the truck to bounce while making a Sharp turn
Nov 12, 2011 at 5:01 AM
It shouldn't. However, if you have a brake hanging up, it could. Check to make sure the brake caliper isn't sticking. Safely lift and support the wheel, spin it, have a helper hit the brake, and then see if you can turn the wheel after the brakes are released. If the rotor is overheating, it could be grabbing.
Nov 12, 2011 at 5:04 AM
Will do thanks
Nov 12, 2011 at 5:09 AM
Let us know what you find.
Nov 13, 2011 at 1:54 AM