how do you bleed the air out of the vehicle listed above clutch system, if the clutch doesn't have a slave cylinder?
Dec 20, 2010 at 10:46 PM
How to bleed clutch system?
2001 CHEVROLET S-10
TRENTW
- MEMBER
- 4 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
There is a slave cylinder on this clutch is it just part of the throw out bearing.
Here are a couple guides that will help with this as well:
https://www.2carpros.com/articles/throw-out-bearing-replacement
https://www.2carpros.com/articles/pilot-bearing-replacement
Below you will find the process from the manual that will show the replacement and bleeding procedure.
Please run through this material and let us know if you have other questions. Thanks
Here are a couple guides that will help with this as well:
https://www.2carpros.com/articles/throw-out-bearing-replacement
https://www.2carpros.com/articles/pilot-bearing-replacement
Below you will find the process from the manual that will show the replacement and bleeding procedure.
Please run through this material and let us know if you have other questions. Thanks
Images (Click to enlarge)
Jul 18, 2021 at 8:44 PM
Advertisement