how do you replace the turn signal switch on a 2001 malibu
Feb 19, 2011 at 1:02 AM
turn signal switch
2001 CHEVROLET MALIBU
WILHELM64
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Removal Procedure
Caution: Refer to SIR Caution in Service Precautions.
Disable the supplemental inflatable restraints (SIR). Refer to Disabling the SIR System in Restraint Systems.
Remove the steering column trim cover.
Remove the mounting screw (1) from the multifunction switch (2).
Remove the multifunction switch (1) from the column (2).
Disconnect the electrical connectors (3) from the multifunction switch (1).
Caution: Refer to SIR Caution in Service Precautions.
Disable the supplemental inflatable restraints (SIR). Refer to Disabling the SIR System in Restraint Systems.
Remove the steering column trim cover.
Remove the mounting screw (1) from the multifunction switch (2).
Remove the multifunction switch (1) from the column (2).
Disconnect the electrical connectors (3) from the multifunction switch (1).
Images (Click to enlarge)
Feb 19, 2011 at 1:06 AM
Advertisement