misfire at 5000 revs

2001 AUDI A4
109,000 MILES • 4 CYL • 2WD • MANUAL
Avatar
MOBILES1
  • MEMBER
  • 2 POSTS
Audi A4 1.6 T AVj 2001.
Replaced cam belt, cam tensioners, N75,all air pipes and vac's. New oil pump, crank sensors. Car still reads Cam Sensor fault, cam sensor replaced.
Car seems to feel like it is hitting the rev limiter stalls and starts code reader says misfire on cynler 1, coils packs seem fine and now totlly lost on what the probelm is. This was all replaced due to sludge problem.
May 25, 2011 at 10:00 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
RASMATAZ
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 75,992 POSTS
Check no.1 cyl -sparkplug, compression and injector -start here
May 25, 2011 at 10:06 AM
Advertisement
Avatar
MOBILES1
  • MEMBER
  • 2 POSTS
do you know what the compression should be for a car of this mailage please?
May 25, 2011 at 11:22 AM
Avatar
MHPAUTOS
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 31,937 POSTS
I would also get the KVa readings on the coil at that engine speed i may be breaking down, i would be thinking more electrical if it is only at higher engine RPM.
Aug 25, 2011 at 7:36 AM