misfire at 5000 revs

2001 AUDI A4
109,000 MILES • 4 CYL • 2WD • MANUAL
Avatar
MOBILES1
  • MEMBER
  • 2 POSTS
Audi A4 1.6 T AVj 2001.
Replaced cam belt, cam tensioners, N75,all air pipes and vac's. New oil pump, crank sensors. Car still reads Cam Sensor fault, cam sensor replaced.
Car seems to feel like it is hitting the rev limiter stalls and starts code reader says misfire on cynler 1, coils packs seem fine and now totlly lost on what the probelm is. This was all replaced due to sludge problem.
May 25, 2011 at 10:00 AM
Advertisement
Avatar
RASMATAZ
  • ✓ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
Check no.1 cyl -sparkplug, compression and injector -start here
May 25, 2011 at 10:06 AM
Avatar
MOBILES1
  • MEMBER
  • 2 POSTS
do you know what the compression should be for a car of this mailage please?
May 25, 2011 at 11:22 AM
Avatar
MHPAUTOS
  • ✓ASE Certified Mechanic
  • 31,937 POSTS
  • ASE Certified Mechanic
I would also get the KVa readings on the coil at that engine speed i may be breaking down, i would be thinking more electrical if it is only at higher engine RPM.
Aug 25, 2011 at 7:36 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.