Errors of the solenoids VW Golf 4

With so many codes at the same time, the most likely cause would be a fault with the wiring. Check the wireharness connectors for the transmission. Ensure there are no contaminations etc and are clean and secure.

Some were suggesting a problem with the ECU and others were saying its either the valve board which is damaged. Can we rule out these factors

Its driving in limp mode emergency mode

It can be those you have mentioned but I would suggest by starting with checking the wiring. Most common causes for such problems are contaminations to connectors causing bad connections between the solenoids and the ECU.

When codes occurs, they can cause the transmission to go into limp mode.

I have a similar problem with my Audi A4 1,8T from 1998. I receive the following faults:
00266 - Solenoid Valve 5(N98)
00532 - Supply Voltage B+
00260 - Solenoid Valve 2 (N89)

Only the reverse gear will work, and not properly.

What can I do?

Have the codes cleared and test if problem persists, recheck the codes. Let me have the new readings and we shall see what needs to be done.

i am using golf 4 so it has the problem of solenoid so how it be fixed

What codes do you have?

I have the following code GTI mk4 not shifting from 3rd gear. Any help would be appreciated. Am really stuck

The speed sensor errors were fixed and are nolonger showing up now left with the solenoid valve error codes

I would check the electrical connector at the transmission for corrosion/damage please check each of the pins and sockets. Let me know what you find.