2000 Toyota Tundra engine missfire

Tiny
CBLAZ
  • MEMBER
  • 2000 TOYOTA TUNDRA
  • 148,560 MILES
Ok I had to change my water pump so I decided to change my timing belt and islets and tensioner once I got it back together and started it I had a miss so I hooked up my code reader and it said I had multiple missives code and two bad coils so I replaced them and zeroed the computer then took it for a drive and two more coil codes popped up so I replaced them took it for another ride and engine light came on again and this is the codes I got 1305/1310/1320/1340/ and po 303 bad coil pack this coil is one I just replaced I am really at a standstill the truck starts fine and isles fine you can drive it but it clearly has a miss. Oh and those 4 codes 1305/1340 come on as soon as you start the truck after they are cleared thanks
Thursday, October 24th, 2013 AT 5:56 PM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
For some idiotic reason if you don't use factory coils these misfires will come up and not work the truck right. I have no idea why this h appens. The 1300 series codes are ignitor not working which leads to a pcm problem but may be from the coils not working right. If you change to factory coils then have a pro look at this because you don't want to be changing pcm as it has to be programmed to your vehicle anyhow
Was this
answer
helpful?
Yes
No
+1
Friday, October 25th, 2013 AT 7:28 AM
Tiny
CBLAZ
  • MEMBER
  • 2 POSTS
Thank you I will try that
Was this
answer
helpful?
Yes
No
Friday, October 25th, 2013 AT 10:21 AM

Please login or register to post a reply.

Sponsored links